Tuesday, November 18, 2008

Tooth Exreaction Sore

FORMATS



CONCEPT format is called the sheet of paper on which a drawing is made, the form and dimensions in mm. are normalized. In 1026-2 UNE 83 Part 2, equivalent to ISO 5457, specifies the characteristics of the formats.
DIMENSIONS The dimensions of the formats comply with the rules of folding, likeness and reference. According to which:
1 - A format is obtained by transverse bending of the immediate superior.
2 - The relationship between the sides of a format is equal to the ratio between the side of a square and diagonal, ie 1 /.
3 - And finally to obtain the formats form part of a basis of 1 m2.
Applying these three rules, determines the size of the A0 format called base whose dimensions would be 1189 x 841 mm.
The other formats of the series A, are obtained by successive folded A0 format.
The stable standard envelopes, folders, files, etc. two auxiliary series B and C.
Las dimensiones de los formatos de la serie B, se obtienen como media geométrica de los lados homólogos de dos formatos sucesivos de la serie A.
Los de la serie C, se obtienen como media geométricas de los lados homólogos de los correspondientes de la serie A y B.
Serie A Serie B Serie C
A0 841*1189 B0 1000*1414 C0 917*1297
A1 594*841 B1 707*1000 C1 648*917
A2 420*594 B2 500*707 C2 458*648
A3 297*420 B3 353*500 C3 324*458
A4 210*297 B4 250*353 C4 229*324
A5 148 * 210 B5 176 * 250 162 * 229
C5
A6 B6 105 * 148 125 * 176 114 * 162
C6
A7 B7 74 * 105 88 * 125 81 * 114
C7
B8 A8 62 52 * 74 * 88 C8 57 * 81
B9 A9 37 * 52 44 * 62
A10 B10 26 * 37 31 * 44
FOLDING UNE - 1027 - 95, sets out how to fold the planes. This will zig-zag, both vertically and horizontally, until it was reduced to the dimensions of archiving. Also shown in this statement that the title block should always be on the front and visible.

on the Media menu
MARGINS: The formats should be drawn inside a box that delimits the area of \u200b\u200bdrawing useful. This box lets margins in the format that the rule provides that not less than 20 mm. for A0 and A1 formats, and not less than 10 mm. for A2, A3 and A4. If folding is expected to file with holes in the paper, you must define a range of archiving a minimum width of 20 mm., On the opposite side to the title block.
TABLE OF SIGNAGE: Also known as box, place den of the drawing area, and at the bottom right address being read, the same as the drawing. UNE - 1035 - 95, establishing the provision can take the picture with his two areas: the identification, maximum width 170 mm. and supplementary information, to be placed above or to the left of that.
CENTER SIGNS: Signs centered. They are placed strokes at the ends of the axis of symmetry of the format, in both directions. Minimum thickness of 0.5 mm. and surpassing the box in 5 mm. There must be a position tolerance of 0.5 mm. These marks are used to facilitate the reproduction and microfilming.
GUIDANCE SIGNS: Signs orientation. Two equilateral triangles drawn arrows or signs focused on, to indicate the blade position on the board.
REFERENCE METRICS GRADUATION: Graduation reference metric. It is a measuring slide of 100 mm in length, divided into centimeters, showing the reduction stems from cases of reproduction.

Friday, November 14, 2008

Hard Lump In Side Neck

Altimetry (MAPPING)

scale. is the mathematical relationship between the actual dimensions and the drawing that represents reality in a plane or map.

What is
The map scale is the mathematical relationship between the dimensions in the map, chart or plane and land it represents. By extension can refer to more or less depth of focus on a geographical theme


Representation Scales written as fraction where the numerator indicates the value plane and the denominator the value of reality. For example, the 1:500 scale means that 1 cm of level equivalent to 5 m in reality.
Examples: 1:1, 1:10, 1:500, 5:1, 50:1
If you want to measure the drawing is a surface, be taken into account the relationship of areas of similar figures, eg a square of side 1cm on the drawing.

types of scales

There are three types of scales:

natural scale. It is when the physical size of the object represented in the plane coincides with reality. There several standard formats of plans to ensure that the majority of parts being machined, are naturally drawn to scale, or 1:1 scale

scale reduction. It is used when the physical size of the plane is less than reality. This scale is widely used to represent small components (E1: 2 or E1: 5) home plans (E, 1:50), or physical maps of areas where the reduction is much larger and scales of the order can be of E.1: 50,000 or E.1: 100,000. For the real value of a dimension is multiplied as the plane by the value of the denominator.

Escala de ampliación . Cuando hay que hacer el plano de piezas muy pequeñas o de detalles de un plano se utilizan la escala de ampliación en este caso el valor del numerador es más alto que el valor del denominador o sea que se deberá dividir por el numerador para conocer el valor real de la pieza. Ejemplos de escalas de ampliación son: E.2:1 o E.10:1

Escala gráfica, numérica y unidad por unidad

La escala numérica. representa una relación entre el valor de la realidad (el número a the left of the symbol ":") and the value of representation (the value to the right of the symbol ":"). An example would be 1:100.000, indicating that 1 unit represents 100,000 of the same units (cm, m, km, etc.).

The scale unit by unit. equality is expressed in two lengths: the map (left of the sign "=") and reality (to the right of the "="). An example would be 1 cm = 4 km and 2 cm = 500 m, etc. Finally

graphic scale is a representation of the scale drawn unit by unit where each segment shows the relationship between the length of the representation and reality. An example would be:
0_________10 km
Standardization of scales according to the UNE EN ISO 5455:1996. "Technical drawings. Escalas" we recommend the following standardized scales: Scales
enlargement: 100:1, 50:1, 20:1, 10:1, 5:1, 2:1
natural Scale: 1:1
scale: 1:2, 1:5, 1:10, 1:20, 1:50, 1:100, 1:200, 1:500, 1:1000, 1:2000, 1:5000, 1: 20000

Representation
map The maps
is usually a graphic scale, a small sign depicting a ruler, with the equivalent distance. To calculate the actual distance we measure the distance on the map and compare, that is, measure it with a graphic scale. To move from the actual distance on the map representation we divide by the scale. Keep in mind that whenever we get results in the units where we have taken action.

The larger the denominator smaller the final map that we get, we say that a scale is small when you get a small map, and great when we get large maps to represent the same element.

The different scales allow us to study different phenomena. On a scale of 1:50 and 1:100 phenomena can be studied much detail (you can draw a house, for example). These representations are called specifically planes. With

between 1:5.000 and 1:20.000 scales can represent city street plans. Between 1:20.000 and 1:50.000 counties and municipalities can study. Between 1:50.000 and 1:200.000 can study areas and roads. Between 1:200,000 and 1:1,000,000 can see the countries and their divisions. A 1:1,000,000 scale below we can see continents and even worldwide.

In small maps, under 1:50.000, information that appears on them is not drawn to scale, so that they can not calculate the width of a road, or the radius of a curve, or extent of a city with only multiply the size of the scale drawing.

should also be borne in mind that maps 1:1.000.000 under the center of the map only maintains the equivalence of the scale. The more the edge we are more deformed find. The character of these deformations depends on the type of projection .

The term "scale" is also used in the methodology in the social sciences : Questionnaire scales, when we say for example that values \u200b\u200bof 0 to 5 the importance of a variable.
for the representation of a scale using the formula E / 1 = d / D where E: scale d: distance in the plane, D: actual distance. to find any of the variables is necessary to clear the formula

Many people do not feel comfortable dealing with numbers and have difficulty understanding the meaning of the scale, but play a scale does not necessarily translated into metric units to understand, is simple: if a plan indicates that its 1:50 scale is placed over it, for example, a shoe, and the distance that the shoe cover on the plane means that to cover that distance in reality need shoes as enfilar 50 is used.